21
4 Basic operation
Specifying the image recording format
To record the date, time, title, logo, and other on-screen information onto the image being
recorded, touch the [MENU] button on the live screen. On the menu that appears, select "SETUP",
and set "PRINT SCREEN ON/OFF" to "ON". (See P.26.)
NOTE
• When playing back a still image that has the date/time, title, logo and other information recorded on it, the
text may be overlapped when displayed. This is not a malfunction.
File names
File names are generated and assigned automatically as images are stored on an SD card. You
can change a file if you want (up to 30 alphanumeric characters and symbols).
NOTE
• When the “FILE NAME MARK” menu is set to “OFF”, or when the file name mark selection is set to “X”
during still image recording, file name marks will not be appended to the name of the image file.
Recording a still image
1 Short-press the [FRZ/REC] button on the main unit while the live image is
displayed.
This freezes the image.
2 Long-press the [FRZ/REC] button on the main unit again while the displayed
image is frozen.
This records the still image.
At this time the screen will momentarily go black, and then the freeze screen will reappear.
100OLYIV_?????_A.***
File name extension
Still image files are recorded in the
“.JPG” extension format, and movies
in the “.MP4” format.
5-digit file name serial number
The file number is assigned
sequentially from 00001 to
99999.
File Name Mark
Shows the file name mark (A, B, C or
D) for classifying the image files.
Same as the folder name
F-model.book 21
To Next Page
Loading...
