32
5 Menu operations and functions
Changing the display language
Use the procedure below to select the language for menus and error messages that appear on the
display.
NOTE
• After the language setting is changed, it may take longer than normal for screen display functions to be
performed. This does not indicate malfunction.
Setting the date and time
Use the procedure below to configure date and time settings.
Be sure to set the correct date and time before using the instrument for the first time.
When “PRINT SCREEN ON/OFF” is set to “ON”, date and time information will be saved inside the
image. Data recording is also performed in accordance with date and time information.
SETUP > LANGUAGE > Select a language.
SETUP > DATE TIME > Set DMY, H:M.
F-model.book 32
To Next Page
Loading...
Need help?
General
