43
VIEWING OR ERASING IMMEDIATELY AFTER SHOOTING
Lens barrier
v To enter the Shooting mode
immediately after playback:
1. Open the lens barrier.
[ The monitor turns off and the Shooting
mode is engaged. You can now shoot.
v When the camera turns on, the monitor may light for an instant and
show an image for a short time. This is not a malfunction.
v Vertical stripes may appear on the image if it is shot under bright
conditions (such as a sunny sky). This is not a malfunction.
v Images shot with other cameras may not be viewable on this camera.
Playback of TIFF and raw data image formats is not possible.
To Next Page
Loading...
