Olympus CAMEDIA C-1 Zoom - Preventing Accidental Erasure (Protection)

3
NO
ON
NO
NO
50
VIEWING OR ERASING IMMEDIATELY AFTER SHOOTING
Preventing Accidental Erasure (Protection)
1/3
SET
OK
SELECT
NO
OFF
NO
NO
It is recommended that you protect important images to avoid accidentally erasing them.
When an image is protected, it cannot be erased unless the card is formatted.
1. Select the image frame to protect by
pressing the or arrow pad key.
(The frame can also be selected even in the
4-frame or 9-frame display mode.)
2. Press the OK/menu button.
[ The monitor shows the Playback mode
menu 1/3.
3. Select by pressing the or
arrow pad key.
4. Select “ON” by pressing the or
arrow pad key.
5. Press the OK/menu button.
[ The selected image frame is protected
(image locked) and the protect indicator
is displayed at the top right of the
image. The protect indicator
disappears after a while.
Check that the lens barrier is closed and the
camera is set to the Playback mode by
holding down the monitor button for a moment.
Operating Procedure
1/3
SET
OK
SELECT
NO
OFF
NO
NO
Playback mode menu 1/3 screen
Playback mode menu 1/3 screen
Arrow pad
OK/menu button
Monitor button