Check that the lens barrier is
open.
1. Press the OK/menu button.
[ The monitor shows the Shooting mode
menu 1/3.
2. Select / by pressing the or
arrow pad key.
3. Select “ ” by pressing the or
arrow pad key.
4. Press the OK/menu button.
[ Self-timer is set and the self-timer mark
( ) is displayed on the monitor.
5. Compose the image in the monitor or
viewfinder, and then press the shutter
button.
[ The self-timer lamp on the front of the
camera lights for 10 seconds and then
blinks for 2 seconds, after which the
shutter is released.
After shooting:
Self-timer is canceled automatically after
shooting a single image.
To cancel self-timer:
Close the lens barrier while the self-timer
lamp lights to turn the camera off.
To reset self-timer:
Press the OK/menu button.
Operating Procedure
You can shoot images with self-timer operation. This is useful for taking pictures
with yourself included in the image. Fix the camera securely on a tripod, etc., before
self-timer shooting.
Self-timer mark
Self-timer lamp
Shooting mode menu 1/3 screen
Shooting mode menu 1/3 screen
Arrow pad
OK/menu button
To Next Page
Loading...
