AUTO
Check that the lens barrier is
open.
1. Press the OK/menu button.
[ The monitor shows the Shooting mode
menu 1/3.
2. Select by pressing the or
arrow pad key.
3. Each time you press the or
arrow pad key, the Flash mode is
switched in the sequence: Auto-
Flash[Red-Eye Reduction Flash
[Fill-In Flash [Night
Scene [Flash Off . Select
one of these modes.
4. Press the OK/menu button.
[ The Flash mode is set and the shooting
screen re-appears. Now you can shoot
images with the selected Flash mode.
The flash has been designed to fire automatically when shooting under low light or
against strong back light. You can select one of the 5 flash modes according to
different shooting situations.
Operating Procedure
Shooting mode menu 1/3 screen
Shooting mode menu 1/3 screen
The Flash mode setting menu can
also be displayed by simply
pressing the ( ) arrow pad
key when the lens barrier is open.
Pressing the ( ) arrow pad
key changes a Flash mode to
another. The setting menu
disappears after a moment if no
operation is performed.
Arrow pad
OK/menu button
To Next Page
Loading...
