Check that the lens barrier is closed and the
camera is set to the Playback mode by
holding down the monitor button for a moment.
You can increase the number of images that can be stored on the card by erasing
unnecessary images.
Operating Procedure
1. Display the frame to erase by
pressing the or arrow pad
key.
(The frame can also be selected even when
the 4-split or 9-split display is selected.)
2. Press the OK/menu button.
[ The monitor shows the Playback mode
menu 1/3.
3. Select by pressing the or
arrow pad key.
4. Select “YES” by pressing the or
arrow pad key.
5. Press the OK/menu button.
[ The selected image is erased.
The orange lamp on the right of the
viewfinder blinks during erasure.
To cancel single-frame erasure:
In step 4, select “NO” and press the
OK/menu button.
Once erased, images cannot be
restored. Check each image before
erasing to avoid accidentally
erasing images you want to keep. Or
lock the image ( Page 50).
To Next Page
Loading...
