Check that the lens barrier is
open.
1. Press the OK/menu button.
[ The monitor shows the Shooting mode
menu 1/3.
2. Press the or arrow pad key to
display the Shooting mode menu 2/3,
and then select .
3. Select a + value (to brighten image)
or – value (to darken image) by
pressing the or arrow pad
key.
Operating Procedure
Although the camera’s exposure is set automatically, you can vary it to change the
image brightness in the range of ±2 stops in 0.5-stop steps.
v
Use this function to obtain correct brightness (exposure) when there is
significant contrast (difference in brightness) in the image.
v
If you want a white object to appear as white as possible, adjust [+] to increase
the exposure. If you want a black object to appear as black as possible, adjust
[–] to decrease the exposure.
Shooting mode menu 1/3 screen
Shooting mode menu 2/3 screen
Arrow pad
OK/menu button
To Next Page
Loading...
