Olympus CAMEDIA C-1 Zoom - Varying the Image Color Tone (White Balance Control)

67
ADVANCED SHOOTING FEATURES
HQ
ON
END
OK
Varying the Image Color Tone
(White Balance Control)
2/3
HQ
AUTO
ON
END
OK
SELECT
1/3
AUTO
OFF
OFF DIGITAL ZOOM
END
OK
SELECT
Check that the lens barrier is
open.
1. Press the OK/menu button.
[ The monitor shows the Shooting mode
menu 1/3.
2. Press the or arrow pad key
to display the Shooting mode menu
2/3, and then select .
3. Select one of the White Balance
Control modes listed on next page by
pressing the or arrow pad
keys.
Operating Procedure
This camera incorporates electronic circuitry to automatically adjust color hues so
that they look natural (auto white balance control circuit). If auto white balance
control does not produce accurate results due to weather or illumination, you can
control the white balance manually.
Natural hues cannot be obtained automatically under a mixture of artificial
lighting and natural lighting or under fluorescent lighting.
Shooting mode menu 1/3 screen
Shooting mode menu 2/3 screen
Arrow pad
OK/menu button