Olympus CAMEDIA C-1 Zoom - Viewing Multiple Images Automatically in Sequence (Slide Show)

48
VIEWING OR ERASING IMMEDIATELY AFTER SHOOTING
Viewing Multiple Images
Automatically in Sequence (Slide Show)
Images in the card can be viewed on the monitor automatically in their stored order. This function
is useful for presentation purposes at a meeting etc. because the images can be displayed on a
large television screen, as well as for checking all the images stored in the card.
1. Press the OK/menu button.
[ The monitor shows the Playback mode
menu 1/3.
2. Select by pressing the or
arrow pad key, and then select
“YES” by pressing the or
arrow pad key.
3. Press the OK/menu button.
[ Slide Show starts by displaying each
frame for 3 seconds.
1/3
SET
OK
SELECT
NO
OFF
NO
NO
Arrow pad
1/3
SET
OK
SELECT
NO
OFF
NO
NO
SET
OK
OFF
NO
YES
Check that the lens barrier is closed and the
camera is set to the Playback mode by
holding down the monitor button for a moment.
Operating Procedure
Playback mode menu 1/3 screen
Playback mode menu 1/3 screen
OK/menu button
Monitor button