40
15. When the [System Properties] dialog box opens, select the
[Hardware] tab and click on the [Device Manager] button.
16. If the driver has been installed successfully, “OLYMPUS(R)
DP20 MICROSCOPE DIGITAL CAMERA SYSTEM” should
be displayed below “USB controller”. After checking this,
click on the [ ] button.
7-3 Installation of Application Software
}Complete the installation of the device driver before proceeding to the installation of the image downloading software.
1. Place the DP20-DRV image downloading software CD-ROM
in the CD-ROM drive.
2. Click on the [Start] button in the Windows taskbar.
3. Select [Run].
4. Enter the following command and click on the [OK] button.
CD-ROM drive: \setup.exe
5. Before proceeding to installation, exit from all running
applications. Then click on the [Next] button.
6. Read the displayed License Agreement. If you agree with it,
check “I accept the terms in the license agreement.” and
click on the [Next] button.
To Next Page
Loading...
