23
EN
Preparation
1
Attaching a lens to the camera
1
Confi rm that the ON/OFF lever is in the OFF
position.
2
Remove the rear cap of the lens
and the body cap of the camera.
1
2
Rear cap
2
1
3
Align the lens attachment mark (red) on the
camera with the alignment mark (red) on the
lens, then insert the lens into the camera’s
body.
Lens attachment mark
4
Rotate the lens clockwise until you hear it click
(direction indicated by arrow 3).
• Do not press the lens release button.
• Do not touch internal portions of the camera.
3
To Next Page
Loading...
