73
EN
Shooting
2
Self-Timer Options (c Custom Self-timer)
Adjust self-timer settings, including the shutter release delay and the number of shots
taken when the timer expires.
1
Press the jY button.
2
Highlight c (custom self-timer) by rotating the front
or rear dial and press the INFO button.
3
Highlight items using HI on the arrow pad and
use FG to choose an option.
P
Custom Self-timer
Y
1s ×3 0.5s Off
Settings
o
Number of Frames Choose the number of shots taken when the timer expires.
Y Timer
Choose how long the camera waits to begin shooting after the
shutter button is pressed all the way down.
Interval Length Choose the interval between the shots taken when the timer expires.
Every Frame AF Choose whether the camera focuses before each shot.
Shooting without the vibration caused by shutter button operations
(Anti-Shock r)
Reduce the slight blur caused by shutter motion.
Use this option when even slight camera motion can cause blur, for example during
macro or telephoto photography.
You must fi rst enable display of this option by selecting [j/Y Settings] (P. 166) in
G Custom Menu P and placing a check (v) next to the appropriate item.
The delay between the shutter button being pressed all the way down and the start
of shooting can be selected using [Anti-Shock r/Silent s] > [Anti-Shock r] in
X Shooting Menu 2 (P. 142).
1
Press the jY button.
2
Select one of the items marked ♦ using the front or rear dial and press the Q
button.
3
Take pictures.
• When the set time has elapsed, the shutter is released and the picture is taken.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
