35
EN
Shooting
2
2
Frame the shot.
• Be careful that your fi ngers or the
camera strap do not obstruct the
lens or AF illuminator.
Landscape position Portrait position
3
Adjust the focus.
• Lightly press the shutter button down to the fi rst position (press the shutter button
halfway).
The AF confi rmation mark (() will be displayed, and a green frame (AF target) will
be displayed in the focus location.
Press the shutter
button halfway AF confi rmation mark
P
S-IS AUTO
1:02:03
1023
250 F5.6
ISO-A
200
S-AF
0.0
0
30
p
30
p
4K
L
F
P
250 F5.6
0.0
0
1:02:03
28mm
T W
ISO-A
200
S-IS AUTO
S-AF
1023
30
p
30
p
4K
L
F
AF frame AF target
• If the camera is unable to focus, the AF confi rmation mark will fl ash (P. 224).
• The AF frame varies with the option chosen for AF-target mode. The area covered
by the AF target can be chosen in the AF-target selection display (P. 65). The AF
frame is not displayed when q (all targets) is chosen for AF-target mode.
4
Release the shutter.
• Press the shutter button all the way (fully).
• The camera will release the shutter and take a picture.
• The shot image will be displayed on the monitor.
• You can focus and take pictures using touch controls. g “Shooting with touch screen
operations” (P. 36)
Pressing the shutter button halfway and all the way down
The shutter button has two positions. The act of lightly pressing the shutter button to the
fi rst position and holding it there is called “pressing the shutter button halfway”, that of
pressing it all the way down to the second position “pressing the shutter button all (or the
rest of) the way down”.
Press halfway
Press the rest of
the way down
To Next Page
Loading...
Need help?
General
Weight and Dimensions
