40
EN
Shooting
2
Subject Too Dark or Too Bright
If the camera is unable to achieve optimal exposure, the shutter-speed display will
fl ash as shown.
Display Problem/solution
Slow shutter speed
60"
F5.6
Underexposure.
• Choose a lower aperture value.
Fast shutter speed
8000
F5.6
Overexposure.
• Choose a higher aperture value.
• If the subject is still overexposed at the higher value, the limits
of the camera metering system have been exceeded. Use a
third-party ND (Neutral Density) fi lter to reduce the amount of
light entering the camera.
• Take pictures in silent mode. g “Shooting without shutter
sound (Silent s)” (P. 74)
• When using a fi xed [ISO] setting, change the setting. g “Changing ISO sensitivity
(ISO)” (P. 70, 80)
Adjusting Settings in Mode A
Use the front and rear dials to adjust the following settings.
Front dial: Exposure compensation (P. 64)
Rear dial: Aperture
• Exposure compensation can also be adjusted using the F
button. Press the F button and rotate the front or rear dial.
%
• You can choose the functions performed by the front and rear dials. g [K Dial
Function] (P. 164)
• You can use the Fn lever to reverse the roles of the front and rear dials. The lever can
also be assigned other roles. g [K Fn Lever Function] (P. 181)
• You can choose whether the display refl ects the effects of exposure settings or maintains
a constant brightness for ease of viewing. At default settings, the effects of exposure
settings are visible in the display. g [Live View Boost] (P. 167)
• You can stop aperture down to the selected value and preview depth of fi eld.
g [K Button Function] (P. 108)
To Next Page
Loading...
