Olympus FV3000 - Exiting the System

Exiting the system
Exiting the software and PC
① Select [Exit] in the [File] menu to
exit the software.
② Select the “Shut down” in Windows
Start Menu.
Turning OFF the power
Touch Panel Controller（TPC)
③ Tap the “OFF” on display of TPC.
Then press the TPC main switch.
*Do not long-press the main switch.
Laser controller
⑤ Turn the laser combiner to OFF.
※Rotate start key of the Power
Supply and set the switch to OFF.
Mercury burner for the light source
⑥ Long-press(2 seconds) the lamp
switch on the front side of the light
source to turn OFF the Mercury
burner.
Central power
⑦ Switch off the central power.
*When using the immersion oil, clean
the objective lens.
Rotate the Key
Turn to
OFF
⑤Laser combiner
④TPC main
switch
Touch Panel Controller（TPC)
③Touch
the ”OFF”
ON/OFF
switch
turn off the
blue light
⑥the mercury lamp
16
①
②
⑦Central
power