Getting Started
29
i--SPEED LT, i--SPEED 2
The Bookmark control is used to set bookmarks at points of interest
and are displayed as white vertical lines in the progress bar at the
top of the screen. When the Trigger is used, an automatic
bookmark is displayed as a Red vertical line.
7. Use the up/down buttons on the right hand side of the CDU to
adjust playback speed.
8. If the video clip is to be saved, insert a compact flash memory card
into the compact flash slot in the camera.
9. Depress Back to return to Playback menu and press Clip select.
Use the control buttons to move to the start frame and press Clip
start, move to end frame and press Clip end.
Frame and memory status is displayed top right.
NOTE
Note that Clip select will not be available until a card is
inserted.
10. Depress Save.
11. Depress BACK as required to return to the Home menu.
5.3 Use with a PC/Laptop
For detailed use with a PC/Laptop, refer to the instruction manual provided
with the software. The i--SPEED 2 is supplied with a factory set IP address
of 192.168.0.54. The user may change this address.
To Next Page
Loading...
Need help?
General
