To Next Page

To Previous Page

Software reference (CDU) i--SPEED LT

i--SPEED LT, i--SPEED 2

Chapter 6 Embedded Software

Reference (CDU)

i- SPEED LT

Introduction

This reference section describes the c amera’s embedded software

and its user interface from the viewpoint of the CDU. In this

section, items which are printed like this

signify the name of a sub

menu, controls are described whenever they appear in a menu.

Operation of the CDU menus

To navigate through the menu system, the button nearest the

desired selection is pressed.

When a control is selected, the desired value may be chosen by

using the

Y and B buttons on the right hand side of the screen.

Repeatedly pressing or to press and hold the control button will

cycle through the available values. The current value is displayed

above the control button and also next to the

YBbuttons.

To return to a higher menu, the Back button is pressed. If there is a

requirement for a text free screen, the Text button is used to cycle

the on --screen text through full, time/date only and off options.

Olympus i-SPEED 2 User Manual

Questions and Answers: