Olympus i-SPEED 2 - Measure Calibration Menu

Software reference (CDU) i--SPEED 2
82
i--SPEED LT, i--SPEED 2
5. Measure Calibration Menu
Access: Measure
' Measure Setup ' Measure Calibrate
Controls: Start End Clear Calibrate
A"YB
S The CDU will display the playback image
` Start Control
This control marks the start of the measurement or calibration.
` End Control
This control marks the end of the known distance which is used in
the calibration process.
` Clear Control
This control clears all the currently marked points, to allow another
measurement to be taken. The control is disabled if there are no
marked points to clear.
`
A " Y B
These controls allow the user to move the measurement cursor.