Maintenance
97
i--SPEED LT, i--SPEED 2
V X -- XX . Bin
a b c d
a. Version
b. Major software issue number
c. Minor software issue number
d. File extension
3. Insert the compact flash card into the slot on the rear of the
camera. A message will appear asking for confirmation to begin
the software upgrade process.
4. During the upgrade process the following messages will be
displayed:
Erasing Flash
Programming Flash
Programming complete
5. Once the “Programming complete” message appears turn the
camera off and on again. The new software v ersion number will
appear on the splash screen
To Next Page
Loading...