Olympus i-SPEED 2 User Manual

Software reference (CDU) i--SPEED 2
70
i--SPEED LT, i--SPEED 2
14. Live Setup Menu
This menu makes available all the items which relate to the live
view systems of the camera. It would be of benefit to read Chapter
8 “Understanding the Olympus i-- SPEED 2” for further descriptions
on several of the terms and phrases used in this section.
NOTE
This menu is not available in Timelapse mode.
Access: i-- SPEED 2 Home
' Live ' Setup
i-- SPEED 2 Home
' Playback ' Live ' Setup
Options: Trig Mode Trig Edge Trig Pos Burst Time
Economy Clear Last Clear Mem
S The CDU will display the live image
` Trigger Mode Control
This control is used to change the camera into Record On
Command (ROC) mode or Burst Record On Command (BROC)
mode.
` Trigger Edge Control
This control sets the trigger detection system to wait for a rising
edge or a falling edge on the trigger input connection.
NOTE
This control is not available in ROC mode, since ROC is
not edge triggered.
This value is stored in non--volatile memory. After a
power cycle, it will be set to the last used position.

Olympus i-SPEED 2 Specifications

General

Brand	Olympus
Model	i-SPEED 2
Category	Security Camera
Language	English