29
5 Basic operation
Recording a moving image
1 While a live image is displayed, press the [FRZ/REC] button.
After a still image is recorded, the moving image recording confirmation window will appear.
2 Select "YES" and then short-press the [ENT/MENU] button.
This starts moving image recording. The USB flash drive indicator flashes on the LCD monitor
while moving image recording is in progress.
If you select [NO] in the moving image confirmation window, only the still image is recorded but
the moving image is not recorded.
3 To stop moving image recording, short-press the [FRZ/REC] button.
When recording of a moving image is complete, the flashing USB flash drive indicator
disappears from the screen.
• Do not remove the USB flash drive while recording a moving image. Doing so will cause moving image
recording to stop and an error message to appear on the display.
• Recording stops automatically whenever the USB flash drive becomes full or when the file size reaches 4
GB. An empty 1 GB USB flash drive has enough capacity to record approximately 30 minutes.
To Next Page
Loading...
