Olympus OEP-5 - 2.4 Connection of the VISERA Video System Center (OTV-S7 V)

Installation and Connection
2
2.4 Connection of the VISERA Video System Center (OTV-S7V)
20
2.4 Connection of the VISERA Video System Center
(OTV-S7V)
Figure 2.3
NOTES
• This instrument can be used by connecting any one of
the following cables: RGB, Y/C, or BNC cable.
• Refer to the instruction manual for the VISERA video
system center (OTV-S7V) for connection to a monitor.
Color video printer (OEP-5)
VISERA Video System Center
(OTV-S7V)
VIDEO OUT
terminal
REMOTE 2
terminal
OEP cable (MH-987)
To a monitor
To Y/C input terminal
of a monitor
INPUT
terminals
SBGR
VIDEO IN
terminal
S VIDEO IN
terminal
S VIDEO
OUT
terminal
BNC cable (MB-677)
Y/C cable (MH-985)
Y/C cable
RGB cable (MH-984)
Y/C
terminal
H.COPY
(Hard copy)
terminal
RGB OUT
terminal