Olympus OEP-5 - When no Mobile Workstation Is Used

Installation and Connection
2
2.14 When no Mobile Workstation is Used
30
2.14 When no Mobile
Workstation is Used
1 Confirm that the color video printer (OEP-5) is
turned OFF.
2 Connect the power cord of the color video printer
(OEP-5) to its AC mains power outlet first, then to
a wall mains outlet.
3 The following ancillary equipment can be
connected directly to wall mains outlets (see Figure
2.13).
4 The following ancillary equipment should be
connected through an isolation transformer (see
Figure 2.13).
EVIS EXERA II video system
center
CV-180
EVIS EXERA video system
center
CV-160
VISERA Pro video system
center
OTV-S7Pro
VISERA video system center OTV-S7V
Video system OTV-SI
EVIS EXERA xenon light
source
CLV-160
EVIS universal light source CLV-U40
Xenon light source CLV-S40, CLV-S30
Universal endoscopic
ultrasound center
EU-ME1
Endoscopic ultrasound center EU-M30S
EUS EXERA endoscopic
ultrasound center
EU-M60
EUS EXERA compact
endoscopic ultrasound center
EU-C60
Image Management Hub IMH-20, IMH-10
Medical control unit for
endosurgery
UCES-3
Control unit for endosurgery UCES-2
High definition LCD monitor OEV261H,
OEV191H
LCD monitor OEV191
Color video printer OEP-5
Monitor Monitor except OEV