Olympus OEP-5 - 5.4 Setup of the Color tone adjustment Menu

System Setup
5
5.4 Setup of the “Color tone adjustment” Menu
54
To return to the menu
Move the cursor on “OK,” and press the “ENTER”
button.
To close the menu
Select “MENU,” and press the “ENTER” button.
5.4 Setup of the “Color
tone adjustment”
Menu
This item is used to adjust the color tones in the video
signal output from this instrument to the monitor. It does
not affect the color tones in the printed picture.
To display the “Color tone adjustment” menu
1 Press the “MENU” button to display the menu.
2 Press “v” or “V” to move the cursor on “Color tone
adjustment.”
Press the “ENTER” button to display the “Color
tone adjustment” menu (see Figure 5.4).
Figure 5.4
Setting “C-R,” “M-G,” “Y-B”
According to the change of the setting value, the color
tone in the video signal output is changed as shown in
the Table 5.2.
1 Press “v” or “V” to move the cursor on “C-R,” “M-
G” or “Y-B.”
2 Press “b” or “B” to select between “-14” and “14.”
3 Adjust any other items by repeating steps 1 and 2.
4 Check the image on the monitor for the desired
color tone.
To switch the uppercase and lowercase
letters
1 Press “v,” “V,” “b” or “B” to move the cursor
on “SHIFT.”
2 Press the “ENTER” button.
When uppercase letters are displayed, they are
switched to lowercase letters.
When lowercase letters are displayed, they are
switched to uppercase letters.
To delete a character
1 Press “v,” “V,” “b” or “B” to move the cursor
on “DEL.”
2 Press the “ENTER” button.
To insert a character in the middle of a
comment
1 Press “v,” “V,” “b” or “B” to move the cursor
on “INS.”
2 Press the “ENTER” button. Now characters can
be inserted by repeating steps 3 and 4.
To input a space
1 Press “v,” “V,” “b” or “B” to move the cursor
on “SP.”
2 Press the “ENTER” button.
Ta bl e 5 .2
Setting Item
Setting Value
decrease increase
C-R Enhanced cyan Enhanced red
M-G Enhanced magenta Enhanced green
Y-B Enhanced yellow Enhanced blue