Before use
We thank you for purchasing the USPM-RU/RUIII. To derive the best performance
from this product, and to use this product safely, be sure to read this instruction manual
when you reinstall USPM-RU/RUIII. After reading this manual, keep it in a safe and
convenient place for future use.
In particular, when you perform a version upgrade or reinstallation on a PC where the
program is already installed, you should perform the following procedures first: “7.
Backing Up the Settings Files”, “8. Uninstalling the Communications Driver”, “9.
Uninstalling the GPIB USB Connecting Driver”, and “10. Uninstalling the
USPM-RU/RUIII Program”.
If a necessary file is deleted by mistake during these uninstallation operations, the PC
may not operate properly.
Installation-related operations must be performed by personnel who have adequate
knowledge and experience in the operation of a personal computer and an
interferometer, and have carefully read this manual.
To Next Page
Loading...
