PV9386-F4E005
10
4. Installing the Communications Driver
* The installation in this chapter is to be performed when the controller of the main unit is
connected via USB. The installation procedures may differ depending on the settings of the
personal computer on which the installation is performed, or may differ if it is a
reinstallation.
(1) Double-click to run “CP210xVCPInstaller_x64 (.exe)” in the “CP201xDriver”
( [Windows7] “_WIN7¥CP210xVCPInstaller_x86 (.exe)” in the “CP201xDriver”) folder
of the CD-ROM.
(2) In the following screen, click the “Next“ button to proceed.
To Next Page
Loading...
