PV6088-F4E017
○ Precautions for proper use of the power cord
When no power cord is attached to the product, refer to the "Specification" and
"Certification codes" below to choose a proper power code for the unit.
Specification
Rated Voltage
Rated Current
Rated Temperature
Length
Components
125 V AC (100–120 V AC), 250 V AC (220–240 V AC)
6 A minimum
60ºC minimum
3.05 m maximum
Grounded inlet plug, with the opposite end formed in compliance with IEC
Table 1. Certification codes
The power cord must be certified by any one of the certification organizations in Table 1, or
be associated with any one of the certification marks shown in Table 1 and/or Table 2. The
connector must be associated with any one of the certification marks in Table 1. If no cords
certified by any of the certification organizations in Table 1 are available in the country
where you use the product, use a substitute certified by the certification body of the country
or any similar organization.
Certification
organization
Certification
organization
JET,JQA,TUV,
UL-APEX/MITI
We do not guarantee the electrical safety of the product, if an
incorrect power cord is connected to the product.
To Next Page
Loading...
