Olympus USPM-RUIII Series - Specifications

PV6088-F4E017
31
9. SPECIFICATIONS
Item
Specification
Spot diameter
Approx. 60 μm (When the 10x objective is used)
Approx. 30 μm (When the 20x objective is used)
Lamp
Halogen lamp: 12 V 100 W (7023 from PHILIPS)
Stage
Size: 180180mm
Withstand load: 1 kg
Operating range: (X) 80mm, (Y) 85mm, (Z) 85mm
Maximum allowable temperature of stage surface is 180ºC
Wavelength range
380 nm-780 nm (440 nm-840 nm on customization)
WD
MPLFLN10×: 11.0 mm
MPLFLN20×: 3.1 mm
Weight
Main unit: Approx. 19.8 kg (PC and printer excluded)
Light source power supply: Approx. 2.9 kg
Controller: Approx. 7.5 kg
Dimensions of
device
Main unit: 300(W)550(D)570(H)mm
Light source power supply: 150(W)250(D)140(H)mm
Control box: Approx. 220(W)250(D)140(H)mm
Specifications of
power source
Light source power supply: 100–240 V AC, 50/60 Hz, 180 VA
Control box: 100–120 V/200–240 V AC, 50/60 Hz, 85 VA
(100–120 V or 220–240 V: setup when shipped)
Fuses
Light source power supply / Control box:
Rating of fuses: 250 V AC, 3.15 A
Type of fuses: Time lag , High breaking capacity type
Size of fuses: φ5.2 mm  20 mm
Shipped with: FIH,250V,3.15A
（Made by Nippon Seisen Co.,Ltd.）
* Compatible parts available