PV9386-F4E005
4
1. Introduction
(1) Preparation
Prepare the following before installing the program.
[For the USB-cable version(for USPM- RUIII)]
1) The computer into which the program is to be installed
2) The program installation CD-ROM
3) The control box (UCB-01) and USB cable.
[For the GPIB-USB connect version(for USPM-RU)]
1) The computer into which the program is to be installed
2) The program installation CD-ROM
3) The GPIB USB Cable.
(2) Computer (PC) specifications
The following system configuration is required to operate the program.
[Windows10]
1) CPU: made by Intel Corporation
2) Chipset: made by Intel Corporation (*1)
3) Memory: 4GB or greater required
4) OS: Windows 10 Professional 64bit
5) CD-ROM drive (external drive can also be used)
6) USB 2.0 x 1 port (2 ports or greater is recommended)
7) Screen resolution: 1024 x 768 or greater
8) Set the power management settings so as not to turn off the hard disk power.
[Windows7]
1) CPU: made by Intel Corporation
2) Chipset: made by Intel Corporation (*1)
3) Memory: 1 GB or greater required (2 GB or greater is recommended)
4) OS: Windows 7 Professional or Windows 7 Business 32bit
5) CD-ROM drive (external drive can also be used)
6) USB 2.0 x 1 port (2 ports or greater is recommended)
7) Screen resolution: 1024 x 768 or greater
8) Set the power management settings so as not to turn off the hard disk power.
*1 Proper operation may not be guaranteed if a different chipset is used.
To Next Page
Loading...
