2. Tutorial (Measuring Procedure)
PV6253-F4E016 9
appear. Enter any desired test No., measuring position, measurer's name, coating device No.,
and measurement date, and then click the [OK] button. Next, the [Save File As] window will
be displayed. Select the target directory, key in the file name, and click [Save]. This operation
will save the measured spectral reflectance data on the disk.
2.13. How to display saved spectral reflectance data
Click [File] at the top of the window, and select [Open]. The [Open File] window will
appear. Select the target directory and file name, and click [Open].
This operation will allow the spectral reflectance data saved on the disk to be loaded to the
computer, and the measurement results will be displayed.
2.14. How to output measurement results to a printer
Selecting [File][Print] causes the [Print] window to open. Click [Print], and the measurement
results will be output to the printer. [See "5.8 [Print] menu" in Section 5.]
To Next Page
Loading...
