Olympus USPM-RUIII Series - Page 55

3. Main Window
PV6253-F4E016 13
position where the cursor is located are indicated. When refractive index is displayed on the panel,
wavelength [nm] and refractive index [n] of the cursor position are indicated. When the quantity of
light is displayed on the panel, wavelength [nm] and the value of the quantity of light are indicated.
When reflectance text or the chromaticity diagram is displayed on the panel, the cursor panel
remains inactive.
[<] and [>] move the cursor in steps of one [nm], while [<<] and [>>] actuate the cursor in steps of
10 [nm]. When the button in the center of the cursor button is pressed, the jump window will
appear. Enter the wavelength of the jumping destination and press the [OK] button. A jump will
take place to the specified wavelength. When multiple data are displayed, a jump will take place to
the data selected with the radio button.
*) The cursor can be moved with "SHIFT" + "<-" or "->", or "Ctrl" + "<-" or "->" in the same
way as with [<<], [<], [>], and [>>].
3.5. Buttons
 [Background] : Executes background measurement.
Similarly, pressing the "F11" key executes background measurement.
 [Reference] : Executes reference measurement.
Similarly, pressing the "F12" key executes reference measurement.
 [Measure1] to [Measure10] : Executes sample measurement.
Similarly, pressing the "F1" to "F10" keys executes sample measurement.
The data line is displayed in the color shown on the button.
 [Data name input box] : Measured data can be assigned any name entering in the input
box located below the Measure button. (The name assigned here is treated as
a test No.)
 [Monitor] : This button is active only when Quantity of Light Graph and Quantity of
Light Text are selected in the [Display] menu. It shows a quantity of light
graph.
 [] : The radio buttons located on the left of the [Measure] buttons are for
selecting data. They indicate whether the data is currently selected or not.
 [Data Clear] : Clears the measured data currently selected with a radio button.
 [All Clear] : Clears all the measured data.