6. Details of [Display] Menu
PV6253-F4E016 21
6.8. [Graph setting] menu
The [Graph setting] menu displays the [Graph setting] window, where detailed settings for
graphic indications of measured data are made. The settings are grouped by tabs. Make setting
by selecting the intended tab.
6.8.1. [Theory] tab
[Reference][Display reference data]
Shows the theoretical spectral reflectance data of a reflecting plane in a measured data graph
in violet.
6.8.2. [Wavelength] tab
Specify here the indication wavelength range of measured data. The specified input range will
have 380 [nm] as the minimum value on the short wavelength side, and 780 [nm] as the
maximum value on the long wavelength side, the minimum value of indication being 20 [nm].
Note: Even when the indication range width is altered, the spectral reflectance data actually
measured will be 380 to 780 [nm], and this range will be stored in the memory.
To Next Page
Loading...
