Olympus USPM-RUIII Series - Page 71

7. Details of [Standard] Menu
PV6253-F4E016 29
● Examples
Ex1) Standard setting of reflectance
Check enable on reflectance is and enable on condition 1 to 3. Then set the Condition 1 to 3 to
next values.
wave
min
Max
Condition 1
400 [nm]
4.2 [%]
4.6 [%]
Condition 2
500 [nm]
4.0 [%]
4.4 [%]
Condition 3
600 [nm]
4.0 [%]
4.4 [%]
Black lines represent reflectance of standard. Blue line represents measurement data. OK/NG is
displayed in the red circle.