8. Details of [Analyze] Menu
PV6253-F4E016 37
8.1.6. [File] tab
Specify the file of the refractive index of the coating material. The file will be that of the
refractive index of 380 to 780 [nm] in steps of one [nm] in text format.
Reference: For details on the file format, see "12. File Configuration" described further ahead.
8.1.7. [Board] tab
Specify the board relectance. The refractive index (n
c
in Equation 8-1) of the coat at the peak
or valley wavelength is sought from the data (n
b
in Equation 8-1) obtained by converting the
loaded board reflectance into a refractive index and the reflectance (R in Equation 8-1) of the
coated state. The file format will be that of the reflectance data (*. csv). (*: An arbitrary file
name). However, the measured data of [Data1 Measured value of wavelength*] (*: An
arbitrary wavelength) among the reflectance data is used as the board reflectance data.
Reference: For details on the file format, see "12. File Configuration" described further ahead.
To Next Page
Loading...
