3
TABLE 1-1
CN9000A MODEL NUMBER DETAILS
MODEL INPUT OUTPUT 1 OUTPUT 2
CN9111A Relay Relay
CN9112A Relay 5VDC SSD*
CN9121A 5VDC SSD* Relay
CN9122A 5VDC SSD* 5VDC SSD*
CN9131A 1 A Triac Relay
CN9141A 4-20 mA Relay
CN9151A 0-10 VDC Relay
CN9211A Relay Relay
CN9212A Relay 5VDC SSD*
CN9221A 5VDC SSD* Relay
CN9222A 5VDC SSD* 5VDC SSD*
CN9231A 1 A Triac Relay
CN9241A 4-20 mA Relay
CN9251A 0-10 VDC Relay
For 230 VAC, add "-230VAC" at the end of the part number.
*SSD output is a Solid State Driver (5 Volt DC Pulse) designed to
be used with a DC controlled solid state relay.
Thermocouple
2-Wire RTD
Linear Millivolt
Signal
3-Wire RTD
To Next Page
Loading...
Need help?
General
