Operating the CMC 353
17
For instructions to help you to incorporate network-capable CMC test
sets into a computer network, please refer to the manual Network-
based CMC Test Sets. This manual is provided in PDF format. It is
available on your hard disk after the installation of OMICRON
Test Universe. Its name is Network-based test sets.pdf.
To view the manual, start the Test Universe Help from the Start Page
or any test module and navigate to the table of contents entry User
Manuals (at the beginning of the table of contents). Click Read Me
First. In this topic you find a direct link to "Network-based CMC Test
Sets". To open the manual, click the link.
2. Connect the CMC 353 test set to the mains.
3. Turn on both devices.
4. Start the OMICRON Test Universe software.
A comprehensive hardware test is carried out on the CMC 353. In the
process, switching sounds from relays in the CMC test set can be heard.
If any irregularities are determined during the course of this self-test, the
software displays a corresponding error message on the PC monitor
(refer to section 8, "Troubleshooting" on page 71).
To Next Page
Loading...
Need help?
General
