Preface
7
PREFACE
The purpose of this reference manual is to familiarize users with the
CMC 353 test set and to show how to properly use it in various application
areas.
The manual contains important tips on how to use the CMC 353 safely,
properly, and efficiently. Its purpose is to help you avoid danger, repair costs,
and down time as well as to help maintain the reliability and life of the
CMC 353.
This manual is to be supplemented by existing national safety standards for
accident prevention and environmental protection.
The reference manual should always be available at the site where the
CMC 353 is used. It should be read by all personnel operating the test set.
Note: The OMICRON Test Universe software also installs a PDF version of
this reference manual. It can directly be opened by a mouse-click from the
help topic "User Manuals of OMICRON Test Universe".
In addition to the reference manual and the applicable safety regulations in
the country and at the site of operation, the usual technical procedures for
safe and competent work should be heeded.
Note: This reference manual describes the CMC 353 hardware - that is, the
physical test set. In order to get familiar with the software for controlling and
configuring the CMC 353, please refer to the software manuals and/or the
OMICRON Test Universe Help.
For Your Safety Please Note
The CMC 353 test set can output life-hazardous voltages and currents.
Throughout the manual, this symbol indicates special safety-relevant
notes/directions linked to the possibility of touching live voltages and/or
currents. Please thoroughly read and follow those directions to avoid life-
hazardous
situations.
This symbol indicates potential hazards by electrical voltages/currents
caused by, for example, wrong connections, short-circuits, technically
inadequate or faulty equipment or by disregarding the safety notes of the
following sections.
To Next Page
Loading...
Need help?
General
