HGT1 User Manual
16 OMICRON
5 System and Firmware Settings
5.1 System Settings
► To access the System Settings, navigate to the left side of the menu bar and select
System Settings.
► Confirm by pressing .
Figure 5-1: HGT1 System view
Table 5-1: Items available in the System view
Option Description
Auto power off If no button has been pressed for the defined time period, the instrument will
switch off.
Backlight Toggle the backlight with the Power/Backlight button and choose from the
following options:
• Auto On/Dimmed:
The backlight is dimmed automatically after two minutes. Press to dim it
manually.
• Auto On/Off:
The backlight is switched off automatically. Press to switch it off
manually.
• Manual:
The backlight is neither automatically dimmed nor switched off. Press to
manually dim or switch off the backlight.
Date and Time The date format is yyyy-mm-dd. All measurements are logged with a date and
time stamp. Use the navigation wheel to set the date and time and confirm
each setting by pressing .
To Next Page
Loading...
Need help?
General
