HGT1 User Manual
4 OMICRON
About this manual
This User Manual provides information on how to use the HGT1 test system safely, properly and
efficiently. The HGT1 User Manual contains important safety rules for working with HGT1 and gets you
familiar with operating HGT1. Following the instructions in this User Manual will help you to prevent
danger, repair costs, and avoid possible down time due to incorrect operation.
The HGT1 User Manual always has to be available on the site where the HGT1 is used. The users of
the HGT1 must read this manual before operating the HGT1 and observe the safety, installation, and
operation instructions therein.
Reading the HGT1 User Manual alone does not release you from the duty to comply with all national and
international safety regulations relevant to working on high-voltage equipment.
Safety symbols used
In this manual, the following symbols indicate safety instructions for avoiding hazards.
DANGER
Death or severe injury will occur if the appropriate safety instructions are not observed.
WARNING
Death or severe injury can occur if the appropriate safety instructions are not observed.
CAUTION
Minor or moderate injury may occur if the appropriate safety instructions are not
observed.
NOTICE
Equipment damage or loss of data possible
To Next Page
Loading...
Need help?
General
