HGT1 User Manual
6 OMICRON
1.3 Operating the measurement setup
The operator is responsible for the safety requirements during the whole test.
► Do not enter the high-voltage area while working with the HGT1.
► Always obey the five safety rules and follow the detailed safety instructions in the respective user
manuals.
► Never connect the HGT1 to the tablet without using the provided USB isolator.
► Only use measurement cables with termination providing protection against contact.
Before performing tests, observe the following instructions:
► Do not insert objects (for example screwdrivers, etc.) into any input/output socket.
► Do not operate the HGT1 under ambient conditions that exceed the temperature and humidity limits
listed in 8 "Technical specifications" on page 30.
► Do not operate the HGT1 in the presence of explosives, gas or vapors.
► Opening the HGT1 invalidates all warranty claims.
► If the HGT1 does not seem to function properly, do not use it anymore. Please call the OMICRON
technical support.
1.4 Orderly measures
The HGT1 User Manual must be read and observed by all users of the HGT1. The HGT1 may be used
only as described in this manual. Any other use is not in accordance with the regulations.
The manufacturer and/or distributor is not liable for damage resulting from improper usage. The user
alone assumes all responsibility and risk.
Following the instructions provided in this User Manual is also considered part of being in accordance
with the regulations.
1.5 Disclaimer
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.
To Next Page
Loading...
Need help?
General
