EasyManua.ls Logo

Omron BCM-500 - Page 21

Omron BCM-500
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
Problem Cause Correction
blinks
24-29 sets of measurements
results have been stored.
Transfer the measurement results to
“OMRON HeartAdvisor” app, then the
symbol will disappear.
30 sets of measurements
results have been stored.
If the number exceeds 30, the oldest
results are deleted.Transfer the
measurement results to “OMRON
HeartAdvisor” app, then the symbol will
disappear.
You pressed and held the
button more than 2 seconds.
This is displayed when you pair your
monitor with your smart device. Follow
the instructions on the “OMRON
HeartAdvisor” app. Press the
button
(2 seconds or longer) to stop the pairing.
You pressed the button.
This is displayed when the data is
transferred to your smart device.
Follow the instructions on the “OMRON
HeartAdvisor” app. Press the
button (2 seconds or longer) to stop the
transmission.
You pressed and held the
button more than 2 seconds
when “
” and the Bluetooth
symbol were blinking.
This is displayed when you delete
the communication setting. (Refer to
Section 13.)
Press the
button (2 seconds or
longer) to stop the operation.
Even if you turn on
the power, nothing is
displayed.
Even if you step onto
the monitor, nothing is
displayed.
No batteries are inserted. Insert the batteries.
The batteries are inserted in
the wrong direction.
Insert the batteries in the correct
direction.
The batteries are worn out. Replace all four batteries with new ones.
After replacing the
batteries, nothing
is displayed when
stepping onto the
monitor.
You didn’t set the
measurement unit, date
and time after replacing the
batteries.
Set the measurement unit, date and
time. (Refer to
Section 4.)
Your body weight is too low to
automatically turn on the unit.
(Less than 26.4lb.)
Select user ID before taking a
measurement.
” is displayed
for some results.
The set-up data or body
composition values were out
of the measurable range.
Check whether the settings of birth date,
gender, and height are correct. Even if
these settings are correct, “
is displayed if they are out of the
displayable or supported age range.

Other manuals for Omron BCM-500

Related product manuals