Omron CJ Series - Page 7

5
Introduction
CJ-series PROFIBUS Master Unit Operation Manual for NJ-series CPU Unit (W509)
CJ-series PROFIBUS-DP Slave Unit Operation Manual for NJ-series
CPU Unit (W510)
Section Description
Section 1
Features and System Configuration
This section provides a brief description of PROFIBUS-DP. It also addresses the
overall specification and the communication performance of the PROFIBUS-DP
CJ1W-PRT21 Slave Unit.
Section 2
Nomenclature and Installation
This section describes the nomenclature and installation of the PROFIBUS Slave
Unit.
Section 3
Data Exchange with the CPU Unit
This section describes the interface and data exchange between the NJ-series CPU
and the PROFIBUS-DP CJ1W-PRT21 Slave Unit.
Section 4
Troubleshooting and Maintenance
This section describes the troubleshooting procedure, event logs and maintenance
procedure for the CJ1W-PRT21 PROFIBUS Slave Unit.
Appendices ---
CJ1W-PRT21 PROFIBUS-DP Slave Unit Operation Manual (CJ-Series
CPU) (W408)
Section Description
Section 1
PROFIBUS-DP
This section provides a brief description of PROFIBUS-DP.
Section 2
Features ad System Configuration
This section describes the overall specification and the communication performance
of the PROFIBUS-DP CJ1W-PRT21 Slave Unit.
Section 3
Installation
This section describes the installation of the PROFIBUS-DP CJ1W-PRT21 Slave
Unit.
Section 4
User Interface
This section describes the interface between the CJ1-series PLC CPU and the PRO-
FIBUS-DP CJ1W-PRT21 Slave Unit.
Section 5
Troubleshooting and Maintenance
This section describes the troubleshooting procedures and maintenance operations
needed to keep the PROFIBUS-DP network operating properly.
Appendices ---
SmartSlice GRT1-Series PROFIBUS Communication Unit Operation
Manual (Cat. No. W04E)
Section Description
Section 1
Features and Specifications
This section provides an introductory overview of the GRT1 series SmartSlice I/O Units and
the GRT1-PRT PROFIBUS, Communication Unit, its functions and how to setup and
configure it for a PROFIBUS network.
Section 2
Installation and Wiring
This section contains the procedures for setting up the PROFIBUS network. It also
describes installing and wiring the Communication Unit as well as the GRT1-series
SmartSlice I/O Units.
Section 3
Setup and Operation
This section describes the operational aspects of the GRT1-PRT and the SmartSlice
I/O system.
Section 4
Troubleshooting and Maintenance
This section describes the troubleshooting procedures and maintenance operations
for the PROFIBUS Communication Unit.
Appendices
The appendices describe the following:
PROFIBUS Technology
Slave Diagnostics Messages
Explicit Messages