Omron CX-PROGRAMMER 5.0-FUNCTION BLOCK OPERATION - Page 74

59
Instruction Support and Operand Restrictions Section 2-6
Note Enabled when the same variable is specified for N1 and N2.
MULTI-OUTPUT
TIMER
MTIM
(BCD)
543 D1: Completion
Flags
UINT ---
D2: PV word WORD ---
S: 1st SV word WORD Yes (8)
MTIMX
(BIN)
554 D1: Completion
Flags
UINT ---
D2: PV word UINT ---
S: 1st SV word WORD Yes (8)
COUNTER CNT
(BCD)
N: Counter number COUNTER ---
S: Set value WORD ---
CNTX
(BIN)
546 N: Counter number COUNTER ---
S: Set value UINT ---
REVERSIBLE
COUNTER
CNTR
(BCD)
012 N: Counter number COUNTER ---
S: Set value WORD ---
CNTRX
(BIN)
548 N: Counter number COUNTER ---
S: Set value UINT ---
RESET TIMER/
COUNTER
CNR
@CNR
(BCD)
545 N1: 1st number in
range
TIMER or
COUNTER
(See note.)
---
N2: Last number in
range
TIMER or
COUNTER
(See note.)
---
CNRX
@CNRX
(BIN)
547 N1: 1st number in
range
TIMER or
COUNTER
(See note.)
---
N2: Last number in
range
TIMER or
COUNTER
(See note.)
---
Instruction Mnemonic Function
code
Symbol Operands Supported
variable
data types
AT setting or
array variable
required
(Required
word data
size shown in
parentheses.)
MTIM
D1
D2
S
MTIMX
D1
D2
S
CNT
N
S
Count input
Reset input
CNTX
N
S
Count input
Reset input
CNTR
N
S
Increment input
Decrement input
Reset input
CNTRX
N
S
Increment input
Decrement input
Reset input
CNR
N1
N2
CNRX
N1
N2