Omron FQ2-S Series User Manual

Control and Output in No-Protocol (TCP) / No-Protocol (UDP)
186
FQ2-S/CH User’s Manual
for Communications Settings
Save commands for
binary data files
PRESCNSAVEB None Before scene data in binary data format is
output, a check is performed to determine
if the data can be received by the external
device that will receive the data.
p.359
SCNSAVEB None This command outputs the scene data in
binary data format.
p.359
PRESGRSAVEB None Before all scene data in binary data for-
mat is output, a check is performed to
determine if the data can be received by
the external device that will receive the
data.
p.360
SGRSAVEB None This command outputs all scene data in
binary data format.
p.360
PRESYSSAVEB None Before system data in binary data format
is output, a check is performed to deter-
mine if the data can be received by the
external device that will receive the data.
p.361
SYSSAVEB None This command outputs system data in
binary data format.
p.361
PREBKDSAVEB None Before all setting data being used by the
current Sensor is output in binary data for-
mat, a check is performed to determine if
the data can be received by the external
device that will receive the data.
p.363
BKDSAVEB None This command outputs all setting data
being used by the current Sensor in
binary data format.
p.363
Type of command Command Abbreviation Function Reference
FQ2-S_CH_comm.book 186 ページ ２０１４年６月２６日 木曜日 午前１１時４７分

Omron FQ2-S Series Specifications

General

Brand	Omron
Model	FQ2-S Series
Category	Security Camera
Language	English