Control and Output in No-Protocol (TCP) / No-Protocol (UDP)
FQ2-S/CH User’s Manual
for Communications Settings
187
3
Controlling Operation and Outputting Data with an
Ethernet Connection
Save commands for
binary data files
PREIMAGESAVEB None Before images saved to the Sensor's
memory are output in binary data format,
a check is performed to determine if the
data can be received by the external
device that will receive the data.
p.364
IMAGESAVEB None Outputs image data stored in the Sensor
memory in binary format.
p.364
PREALLIMAGESAVEB None Before all images saved to the Sensor's
memory are output in binary data format,
a check is performed to determine if the
data can be received by the external
device that will receive the data.
p.365
ALLIMAGESAVEB None Outputs all image data stored in the Sen-
sor memory in binary format.
p.365
PRECLBSAVEB None Before calibration data in binary data for-
mat is output, a check is performed to
determine if the data can be received by
the external device that will receive the
data.
p.366
CLBSAVEB None This command outputs the calibration
data in binary data format.
p.366
PRECGRSAVEB None Before all calibration data in binary data
format is output, a check is performed to
determine if the data can be received by
the external device that will receive the
data.
p.368
CGRSAVEB None This command outputs the all calibration
data in binary data format.
p.368
PREDICSAVEB None Before model dictionary data is output in
binary data format, a check is performed
to determine if the data can be received
by the external device that will receive the
data.
p.369
DICSAVEB None This command outputs model dictionary
data in binary data format.
p.369
PREDGRSAVEB None Before all model dictionary data is output
in binary data format, a check is per-
formed to determine if the data can be
received by the external device that will
receive the data.
p.
37
0
DGRSAVEB None This command outputs all model dictio-
nary data in binary data format.
p.370
Type of command Command Abbreviation Function Reference
FQ2-S_CH_comm.book 187 ページ 2014年6月26日 木曜日 午前11時47分