Calculations and Judgements Using Inspection Item Data
FQ2-S4 User’s Manual
4
Setting Up Inspections
203
Setting Judgement Parameters for Expressions
Reflecting the Judgement Results for Expressions to the Overall Judgement Results
You can specify whether to reflect the judgement results of a calculation in the overall judgement. (The default
is to reflect them.)
[Inspect] − [Calculation] − [Details] Tab Page − [Output parameter] − [Reflect]
1 Press [Judgement] on the [Settings] Tab Page.
2 Press an expression between 0 to 31 and set the cor-
responding judgement parameters using the slider.
3 Press the [OK] Button.
To Next Page
Loading...
