Omron FQ2-S4 - Page 206

Calculations and Judgements Using Inspection Item Data
204
FQ2-S4 User’s Manual
Inspection Item Data That Can Be Used in Expressions
Inspection item Data name Expression text
string
Data range Default
Filter Judgement JG −2: No judgement (not measured)
0: Judgement is OK
−1: Judgement is NG
−2
Shape Sear. pos.
comp.
Judgement JG −2: No judgement (not measured)
0: Judgement is OK
−1: Judgement is NG
−2
Scroll X DX −99999.9999 to 99999.9999 0
Scroll Y DY −99999.9999 to 99999.9999 0
Scroll θ DT −180 to 180 0
Position X X −99999.9999 to 99999.9999 0
Position Y Y −99999.9999 to 99999.9999 0
Angle TH −180 to 180 0
Reference X SX −99999.9999 to 99999.9999 0
Reference Y SY −99999.9999 to 99999.9999 0
Reference angle ST −180 to 180 0
Correlation CR 0 to 100 0
Search position
comp.
Judgement JG −2: No judgement (not measured)
0: Judgement is OK
−1: Judgement is NG
−2
Scroll X DX −99999.9999 to 99999.9999 0
Scroll Y DY −99999.9999 to 99999.9999 0
Position X X −99999.9999 to 99999.9999 0
Position Y Y −99999.9999 to 99999.9999 0
Reference X SX −99999.9999 to 99999.9999 0
Reference Y SY −99999.9999 to 99999.9999 0
Correlation CR 0 to 100 0
Edge position
comp.
Judgement JG −2: No judgement (not measured)
0: Judgement is OK
−1: Judgement is NG
−2
Scroll X DX −99999.9999 to 99999.9999 0
Scroll Y DY −99999.9999 to 99999.9999 0
Ref. position X X −99999.9999 to 99999.9999 0
Ref. position Y Y −99999.9999 to 99999.9999 0
Reference X SX −99999.9999 to 99999.9999 0
Reference Y SY −99999.9999 to 99999.9999 0