Omron FQ2-S4 - Page 208

Calculations and Judgements Using Inspection Item Data
206
FQ2-S4 User’s Manual
Edge rot. pos.
Comp.
Judgement JG −2: No judgement (not measured)
0: Judgement is OK
−1: Judgement is NG
−2
Scroll θ DT −180 to 180 0
Edge0 position X X0 −99999.9999 to 99999.9999 0
Edge0 position Y Y0 −99999.9999 to 99999.9999 0
Edge1 position X X1 −99999.9999 to 99999.9999 0
Edge1 position Y Y1 −99999.9999 to 99999.9999 0
Angle TH −180 to 180 0
Edge0 ref. position X
(edge 0 reference. posi-
tion X)
SX0 −99999.9999 to 99999.9999 0
Edge0 ref. position Y
(edge 0 reference. posi-
tion Y)
SY0 −99999.9999 to 99999.9999 0
Edge1 ref. position X
(edge 1 reference. posi-
tion X)
SX1 −99999.9999 to 99999.9999 0
Edge1 ref. position Y
(edge 1 reference. posi-
tion Y)
SY1 −99999.9999 to 99999.9999 0
Reference angle STH −180 to 180 0
OCR Judgement JG −2: No judgment (not measured),
0: Judgement is OK,
−1: Judgement is NG,
−13: Teaching not performed error,
−14: Figure not registered error,
−15: Out of range error
−2
Index IN −2: Verification OFF, or reading error
−1: Verification is NG,
0 to 31: Master data No.
−2
Number of read charac-
ters
N 0 to 128 0
Similarity SIM 0 to 100 0
Stability STB 0 to 100 0
Number of read charac-
ters (line 1) N1
N1 32 characters max. 0
Number of read charac-
ters (line 2) N2
N2 32 characters max. 0
Number of read charac-
ters (line 3) N3
N3 32 characters max. 0
Number of read charac-
ters (line 4) N4
N4 32 characters max. 0
Individual similarity SM 0 to 100 0
Individual stability SB 0 to 100 0
Bar code Judgement JG −2: No judgement (not measured),
0: Judgement is OK,
−1: Judgement is NG,
−13: Teaching not performed error,
−14: Figure not registered error,
−15: Out of range error
−2
Index No. IN −2: Verification OFF or reading error,
−1: Verification is NG,
0 to 31: Master data No.
−2
Num. of char. N 0 to 1024 0
Inspection item Data name Expression text
string
Data range Default