Omron FQ2-S4 - Page 475

Menu Tables
FQ2-S4 User’s Manual
473
Appendices
12
Inspection
Details
(Color Data)
Output parameter
Reflect You can specify whether to reflect the
judgement results of an inspection
item in the overall judgement.
No, Yes (default), Scene p. 180
(Area)
Meas. Parameter
Fill profile You can set how to process holes for
an Area inspection item.
None (default), Filling up holes, Fill Out-
line
Scene p. 186
Output parameter
Reflect You can specify whether to reflect the
judgement results of an inspection
item in the overall judgement.
No, Yes (default), Scene p. 184
Labeling
Meas. Parameter
Filling up holes Sets how to process areas surrounded
by the specified color.
Yes, No (default) Scene p. 192
Extract image Select this option if there are areas of
the specified color inside the measure-
ment region that you do not want to
measure.
Yes, No (default) Scene p. 192
Extraction con-
dition
Scene p. 193
Number of
labels
Set the maximum number of labels to
detect.
Range: 1 to 100
Default: 100
Scene
Area Specify the area range to judge as a
label.
Range: 0 to 999,999,999.9999
Defaults: Upper limit:
999,999,999.9999, Lower limit: 0
Scene
Gravity X Specify the gravity X position to judge
as a label.
Range: −99,999,999.9999 to
999,999,999.999
Defaults: Upper limit: 999,999,999.999,
Lower limit: ?999,999,999.9999
Scene
Gravity Y Specify the gravity Y position to judge
as a label.
Range: −999,999,999.9999 to
999,999,999.999
Defaults: Upper limit: 999,999,999.999,
Lower limit: −999,999,999.9999
Scene
Sorting method Set the condition to use for label num-
ber reassignment.
Area ascending order, Area descending
order (default), Pos. X ascending order,
Pos. X descending order, Pos. Y
ascending order, Pos. Y descending
order
Scene p. 193
Output parameter
Reflect You can specify whether to reflect the
judgement results of an inspection
item in the overall judgement.
No, Yes (default), Scene p. 194
Menu command Description Setting range Data Refer-
ence